Blog
Practical guides on specifying, comparing and using HDPE ground protection mats — written by the factory.
The Complete Guide to HDPE Ground Protection Mats
Materials, types, thickness, load, comparisons, installation, quantity and cost — every decision in one place, with links to in-depth guides.
Read the guide →HDPE vs PP: Which Plastic Is Right for Ground Protection Mats?
HDPE and polypropylene compared on cold toughness, impact, UV and water resistance — with a clear answer on which plastic to specify for a ground mat.
Read the guide →HDPE Ground Mats vs Timber Mats: Weight, Durability and Cost per Use Compared
Thick timber, bog and rig mats vs HDPE — a factor-by-factor comparison of weight, rot resistance, surface safety, reuse and cost per deployment.
Read the guide →How to Choose HDPE Ground Protection Mat Thickness: A Buyer’s Guide
Six gauges from 12.7 to 60 mm, matched to equipment and ground — with a selection table and the base-vs-overall distinction most specs get wrong.
Read the guide →How HDPE Ground Protection Mats Are Made: Inside a Compression Molding Factory
A ground protection mat is made or broken before it reaches the site — in the resin, the mold and the press. See the eight-stage compression molding process behind an HDPE mat.
Read the guide →HDPE Ground Protection Mats vs Steel Plates: Where Each One Actually Wins
An application-by-application comparison of HDPE ground protection mats and steel road plates, with a six-point specification checklist.
Read the guide →