lightweight Ground protection mats 1.8mx 0.9m for soft ground

For safe, temporary access across soft ground and in extreme weather nditions, our X mat is the ultimate, extreme, heavy duty mat. Panel Dimesions: 2410 x 1200 x 12mm. (Usable surface area: 2.89m²)

ground protection mats guard sensitive surfaces against equipment rutting while protecting pedestrians from mud and uneven surfaces. mats nnect using optional 2-way or 4-way DuraLink metal nnectors, which prevent mats from skipping and hopping under heavy vehicle traffic, mait Signature’s lightweight access mats safe

Jan 30, 2020 · ranged from around 4.5 to 6.0 m below ground level (bgl). 1.2.2 Based on the latest engineering design, the abovementioned land (MFC) of Civil Engineering and Development Department (CEDD) under ETWB TC(W) No. 34/2002. 1.3 Structure of this Report 1.9m down, 2.9m down and then every down to the borehole termination depth.

Jan 30, 2020 · customized size Ground protection mats 1.8mx 0.9m for civil Engineering ERITECH Facility Electrical Protection - ERITECH Lightning PPER BONDED GROUND RODS: nductor Size: Rod Size 1/2” (12.7 mm) Rod Size 5/8" (14.2 mm) Rod Size 3/4" (17.2 mm) Part # Provides a direct ground resistance reading of 0.1 to 1200 Oh;

These ½” thick mats are durable enough to take everyday punishment but are lightweight enough to be easily moved by hand. Made in the USA. The #1 proven & trusted leader. Limited lifetime warranty. Durable, long last ground protection. Will never rot, splinter, warp or break. Multipe sizes & tread options to fit your exact need.

They range in size from 6 to 8 feet long ways and 2 to 4 feet in width. Most are 1/2 inch thick. Depending upon their size, these weigh between 33 and 86 pounds. Many of our heavy duty ground protection mats have two surface options: cleated or smooth. These may both be incorporated into one design.

Entrance Matting help prevent dirt. It is a rOkaygnised fact that 70 to 80% of interior soiling enters buildings via foot traffic. Good entrance matting syste can dramatically reduce this by stopping dirt at the door – in fact one square metre of matting can hold up to half a litre of excess moisture or remove half a kilo of dirt in a week, significantly reducing cleaning and maintenance

good quality ground protection boards 1.8mx 0.9m for Measures 1.8m L x 0.9m W x 1.2m H. Easily assembled using fibreglass poles. Very lightweight and easy to put in place and relocate. Made from UV treated materials. Easy access with two zips one in the short side and one in the long side. Anchors securely to the ground with 13 x 8″ pegs included.

Get rental information on GROUND MATS 1.8 X 0.9M from Kennards Hire. Visit us online or call at 0800470370 to hire equipment, tools or Ground Mats & Dust Suppression for your residential, mmercial, industrial and DIY needs.

Measures 1.8m L x 0.9m W x 1.2m H. Easily assembled using fibreglass poles. Very lightweight and easy to put in place and relocate. Made from UV treated materials. Easy access with two zips one in the short side and one in the long side. Anchors securely to the ground with 13 x 8″ pegs included.

small pattern Ground protection mats 1.8mx 0.9m for Ground-Guard Protection Mats 1 E01 A temporarytile access system for instant roadways, car parks and ground protection – prevents ground damage. Ground-Guard Protection Mats are manufactured from ½” thick recycled high-density polyethylene, and offer the perfect solution to churned-up landscapes and reduced traction for works vehicles.

A 1:0.5 slope means that for every 1 metre along the ground, the slope height increases by 0.5 metres. A gradient can be expressed in 2 ways, a number or a ratio. For instance, a 1:40 gradient number is shown as 0.025 (an example is shown in the calculation section). The same number can be nverted into a ratio

This modular nstruction matting is ideal for temporary roads and providing vehicle access over sensitive or soft substrates. Ground Protection Mats are durable and can be reused for 10+ years. The ground matting can also be cleaned to avoid cross ntamination of invasive species between job sites.