3/4 Inch ground access mats 100 tons load capacity 1.8mx 0.9m pink Ground protection mats 100 tons load capacity 2’x8′ blue ground protection boards 100 tons load capacity That means the total width of the first supported load area extends from the end of the beam to the 3.25′ mark along the beam (1.5′ + 1.75′).
HNOKAY Ground Protection Mats Manufacturer UHMWPE Ground lor: Black: Worit Temp-170℃~100℃ Molecular Weight: 3~9 Million: Size: 4*8ft, 1220*2440 mm: Thickness: 1/2 inch, 12.7 mm Traction 1 side traction Ground Protection Mats Temporary nstruction Site Equipment These ground protection mats feature a power cylinder tread surface for maximized traction.
This is an ideal opportunity to acquire a stock of boards for your ntinued use at a great price. It uld even work out cheaper than hiring boards for your project! Call for our best price! Simply call us on: +44 (0)113 267 6000 , to check availability and order your boards now. Offer subject to availability.
Apply boards to clean dry membrane and roll ‘patches’ firmly. Remove release film from ‘patches’ and apply boards to membrane. Once the protection board is fixed in place, subsequent boards shall be laid ntinuously by butt fitting the edges. Ensure boards stay close butt joints during backfilling and mpaction.
3/4 Inch yellow ground protection boards 60 T load capacity 3/4 in. x 4 ft. x 8 ft. G1S EXT Fir MDO Board 185303 MDO panel is a paintable surface made of plywood with a weather-resistant resin overlay bonded to the wood by heat and pressure. MDO board resists water, weather, wear and degradation. Designed to have a smooth, paint-receptive surface.
Dec 05, 2022 · Replace your plywood boards with mposite mats. mposite mats like ground protection solutions are designed to answer all the failures of plywood boards for a safer and ultimately much more st-effective alternative. Damage resistant. Opting for ground protection mats made from 100% recycled high-density polyethylene ensures minimal
Foam-Control R-HDPEeld is a film-faced protection board available in a range of thicknesses up to 4” and Types that provide optimum handling, durability, and protection resistance. Foam-Control R-HDPEeld is also available in a fanfold nfiguration in 3/8, 1/2, and 3/4 inch thicknesses. Foam-Control Protection Board.
This item: 48 in. x 96 in. x .157 in. White rrugated Plastic Cardboard (10-Pack) $155.51. 1.88 in. x 60 yds. White Duct e. $6.97. Roberts Big Fatso Multipurpose Utility Knife with Quick Blade Change. $6.97.
– The Best Ground Protection Mat – Apr 28, 2022 · IN STOCK – 4×8 Black Mats – $297 each! These rugged mats are of 1/2″ thick polyethylene so they are virtually indestructible.
Design Capacities for Structural Plywood – PFS·TOkay 1-1/8 1.125 3.4 13.500 1.424 2.531 1.898 9.00 (a) The values in this table rrespond with those published in the 2005 edition of the AF&PA American Wood uncil’s mmentary National Design Specification (NDS) for Wood nstruction ASD/LRFD Table C9.2.4, which is available from the AF&PA American Wood uncil.
They range in size from 6 to 8 feet long ways and 2 to 4 feet in width. Most are 1/2 inch thick. Depending upon their size, these weigh between 33 and 86 pounds. Many of our heavy duty ground protection mats have two surface options: cleated or smooth. These may both be incorporated into one design.
Product nforming to ASTM D 6506, Class A also available by special order. APPLICATION NOTE: Prior to application, nsult the waterproofing manufacturer to determine whether the polyethylene film facing on one side, or the asphalt-impregnated reinforced mat on the other side of PROTECTION URSE, is approved as “compatible” to the specific waterproofing product being protected.
For any difficulty using this site with a screen reader or because of a disability, please ntact us at 1-800-444-3353 or cs@harborfreight.com.. For California nsumers: more information about our privacy practices.
LiteTrack 2.4m x 1.2m x 12mm (8′ x 4′) £ 80.99 ex. VAT. Light duty ground protection mats, Walkways/Surface protection.